Fine-surface finishing on sound concrete
MAPEI / PRODUCT DETAILS
PLANITOP 110 ME
Single-component cementitious mortar for smoothing and filling small imperfections in concrete.
Product class: R2 · EN 1504-3 (regional reference)Application thickness: 1–2 mm per coat (reference)
Enquire about PLANITOP 110 ME ↗
Application illustration01 / PRODUCT PROFILE
PLANITOP 110 ME
Single-component cementitious mortar for smoothing and filling small imperfections in concrete.
Confirm technical suitability and local product documentation before installation.
TECHNICAL SPECIFICATIONS
| Product class | R2 · EN 1504-3 (regional reference) |
| Application thickness | 1–2 mm per coat (reference) |
| Typical format | 20 kg bag (reference) |
| Approx. consumption | ~1.3 kg/m² per mm (reference) |
| Mix water | 6.2–6.4 L per 20 kg bag (reference) |
| Working time | Approximately 1 hour (reference) |
02 / BENEFITS
Designed for performance.
Single-component cementitious preparation
Helps fill shallow imperfections and pores
03 / TYPICAL USES
Where it makes sense.
- Minor concrete imperfections
- Concrete patch and smoothing work within the stated layer thickness
- Surface preparation for compatible finishes
- Renovation of localized nonstructural surface defects
04 / APPLICATION SEQUENCE
From prep to finish.
General guidance; refer to the current local technical documentation.
01Remove unsound, dusty or contaminated material.
02Dampen or prime as required by the local technical sheet.
03Mix with the specified quantity of clean water.
04Apply within recommended thickness and finish before initial setting.
START A CONVERSATION
Specify PLANITOP 110 ME.
Contact UNEC to discuss product availability and technical guidance.